How To Setup OpenConnect on iOS

Download and Install Cisco AnyConnect:

1. Go to the App Store on your device.
2. Download and install Cisco AnyConnect from this link.

Configuration Steps

1. Open the installed Cisco AnyConnect app.
2. Upon launching, you may encounter a prompt. Tap 'OK' to enable AnyConnect on your device.
3. Within the app, locate and tap on 'Settings'.
4. Uncheck the option 'Block Untrusted Servers'. This is important for the connection to function properly.
5. Tap on 'Connections' and then select 'Add VPN Connection…'.
6. Enter the server address provided by BitChute VPN.(Please ensure to add https:// before the server IP or server hostname)
7. Tap 'Save' to store the server settings.

Connection Setup

1. Return to the main screen and tap on 'AnyConnect VPN'.
2. Input your BitChute VPN username when prompted.
3. Tap on 'Connect' to establish the VPN connection.

Enjoy Secure Browsing

• Once connected, you can now enjoy the benefits of the BitChute VPN service for secure and private browsing.

How To Setup OpenVPN on iOS

Download the OpenVPN Profile:

• Download the ZIP file from this link on your computer or iOS device.

  Extract the Profile:

  1. If you downloaded the ZIP file on your computer, unzip it.
  2. If you downloaded it directly on your iOS device, open the Files app and locate the downloaded ZIP file. Tap on it to extract the contents.

  Transfer Profile to iOS Device (if needed):

  1. If the profile was downloaded on your computer, transfer the extracted .ovpn file to your iOS device using AirDrop, email, or any preferred file transfer method.

  Install OpenVPN Connect:

  1. Open the App Store on your iOS device.
  2. Search for "OpenVPN Connect" and install the app.

  Import the Profile:

  1. Open the OpenVPN Connect app
  2. Tap on "OVPN Profile" at the bottom of the screen.

  Add the Profile:

  1. Tap on "Import" in the top right corner.
  2. Browse and select the .ovpn file you downloaded or transferred to your iOS device. Tap on "Import" to add the profile.

  Connect to the VPN:

  1. Once the profile is imported, you'll see it listed in the OpenVPN Connect app.
  2. Tap on the profile name to connect.
  3. Enter your VPN username and password if prompted, then tap "Connect."

  Connection Status:

  • Once connected, the status will change to show that you're connected to the VPN.

  Disconnecting:

  • To disconnect, open the OpenVPN Connect app and tap the "Disconnect" button.